Used Equipment For Sale

VINYL TILE FLOOR SCRAPER

Key: FLR SCRAPER#10
Manufacturer: N/A
Model: N/A
Sale Price: $1,000.00
Comments:
  • Weight: (106lbs)
  • Removable Weight:(35lbs)
  • Max Length: (36.1in)
  • Max Height: (35.3in)
  • Max Width: (14.4in)
  • Motor Horsepower
  • Can you lift anything else than vinyl?
  • Yes you can! You can remove glued carpet, vinyl, cork and waterproofing membranes.
  • 1. Adjust the handle. To adjust the handle. Loosen hand screw until the handle can
  • move up and down. When in position required, tighten hand screw securely.
  • 2. Selecting a blade
  • READ CAREFULLY:
  • FOR CONCRETE FLOORS extend the blade approximately
  • 20mm with the bevel facing up.
  • FOR TIMBER FLOORS extend the blade approximately 50mm
  • with the bevel facing the floor. If the blade has a
  • tendency of digging into the timber floor, extend the blade further
  • out. Always run the blade with the grain of the wood to reduce
  • gouging (some gouging will occur)
  • i. TILES 5 Blade. Pre-cut the flooring into 6 strips for ease of removal.
  • Run the machine diagonally to the tile joints s it is faster and easier.
  • ii. LINOLEUM / VINYL SHEET GOODS 5 Blade. Pre-cut the flooring into
  • 6 strips for ease of removal.
  • iii. CARPET Larger Blade. Pre-cut the flooring into 6 strips for ease of
  • removal. Cut carpet every 16 for ease of removal. It is generally faster
  • and easier to use two people, one running the machine and the other
  • removing the materials away from the machine
  • iv. Floor conditions vary and you may have to vary the extensions of the
  • blades.
  • v. If the blades have a tendency of riding over the material you are
  • removing, the blade may have become dull and need replacing. Caution
  • should be used in not raising the stripper too high.
Where to find VINYL TILE FLOOR SCRAPER in Bellingham

Image for reference only
Actual item may look different
Click on image for larger view

 

Add of the above items to my quote request



* Prices are subject to change.